all published data at t case = 25c unless otherwise indicated esd: electrostatic discharge sensitive device?observe handling precautions! data sheet 1 of 10 rev. 03, 2016-06-14 PTMC210204MD wideband ldmos two-stage integrated power ampli er 20 w, 28 v, 1805 ?2200 mhz features ? on-chip matching for broadband operation ? typical pulsed cw performance, 1990 mhz, 28 v, combined outputs - output power at p 1db = 20.9 w - ef? ciency = 56% - gain = 31 db ? capable of handling 10:1 vswr @28 v, 20.9 w (cw) output power ? integrated esd protection ? human body model class 1a (per ansi/esda/ jedec js-001) ? integrated temperature compensation ? pb-free and rohs-compliant description the PTMC210204MD is a wideband, two-stage, ldmos integrated power amplifier. it incorporates internal matching for operation from 1805 mhz to 2200 mhz, and dual independent outputs with 10 w of output power each. it is available in a 14-lead plastic overmold pack- age with gull wing leads. rf characteristics single-carrier wcdma specifications (tested in infineon test fixture) v dd = 28 v, i dq1(a+b) = 20 ma, i dq2(a+b) = 120 ma, p out = 2.5 w avg, ? = 1990 mhz, 3gpp wcdma signal, channel bandwidth = 3.84 mhz, peak/average = 7.5 db @ 0.01% ccdf characteristic symbol min typ max unit linear gain g ps 28.5 30.5 33.5 db power added ef? ciency pae 17 19 ? % adjacent channel power ratio acpr ? ?47 ?40 dbc 0 15 30 45 60 0 10 20 30 40 25 30 35 40 45 efficiency (%) peak/average ratio, gain (db) average output power (dbm) single-carrier wcdma drive-up v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, ? = 1930 mhz 3gpp wcdma signal, 7.50 db par, 3.84 mhz bandwidth gain par @ 0.01% ccdf efficiency c210204md-gr1a PTMC210204MD package pg-hb1dso-14-1 (formed leads)
PTMC210204MD data sheet 2 of 10 rev. 03, 2016-06-14 dc characteristics stage 1 conditions symbol min typ max unit drain leakage current v ds = 28 v, v gs = 0 v i dss ? ? 0.1 a v ds = 60 v, v gs = 0 v i dss ? ? 1.0 a gate leakage current v gs = 1 v, v ds = 0 v i gss ? ? 0.1 a on-state resistance v gs = 10 v, v ds = 0.1 v r ds(on) ? 8 ? ?? operating gate voltage v ds = 28 v, i dq1 = 20 ma v gs1 ? 2.7 ? v fixture operating gate voltage v ds = 28 v, i dq1 = 20 ma v gs1 ? 4.52 ? v stage 2 conditions symbol min typ max unit drain-source breakdown voltage v gs = 0 v, i ds = 10 ma v br(dss) 65 ? ? v drain leakage current v ds = 28 v, v gs = 0 v i dss ? ? 0.1 a v ds = 60 v, v gs = 0 v i dss ? ? 1.0 a gate leakage current v gs = 1 v, v ds = 0 v i gss ? ? 0.1 a on-state resistance v gs = 10 v, v ds = 0.1 v r ds(on) ? 0.9 ? ?? operating gate voltage v ds = 28 v, i dq2 = 120 ma v gs2 ? 2.72 ? v fixture opererating gate voltage v ds = 28 v, i dq2 = 120 ma v gs2 ? 4.74 ? v maximum ratings parameter symbol value unit drain-source voltage v dss 65 v gate-source voltage v gs ?6 to +12 v junction temperature t j 225 c storage temperature range t stg ?65 to +150 c operating voltage v dd 0 to 32 v thermal characteristics characteristic symbol value unit thermal resistance stage 1 (t case = 70c, 10 w cw) r ? jc 9.7 c/w stage 2 (t case = 70c, 10 w cw) r ? jc 3.1 c/w moisture sensitivity level level test standard package temperature unit 3 ipc/jedec j-std-020 260 c
data sheet 3 of 10 rev. 03, 2016-06-14 PTMC210204MD 0 15 30 45 60 0 10 20 30 40 25 30 35 40 45 efficiency (%) peak/average ratio, gain (db) average output power (dbm) single-carrier wcdma drive-up v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, ? = 1960 mhz 3gpp wcdma signal, 7.50 db par, 3.84 mhz bandwidth gain efficiency par @ 0.01% ccdf c210204md-gr1b 0 15 30 45 60 0 10 20 30 40 25 30 35 40 45 efficiency (%) peak/average ratio, gain (db) average output power (dbm) single-carrier wcdma drive-up v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, ? = 1990 mhz 3gpp wcdma signal, 7.50 db par, 3.84 mhz bandwidth par @ 0.01% ccdf efficiency gain c210204md-gr1c ordering information type and version order code package and description shipping PTMC210204MD v1 r5 PTMC210204MDv1r5xuma1 pg-hb1dso-14-1, 14-lead, overmold tape & reel, 500 pcs evaluation boards order code frequency description ltn/PTMC210204MD v1 1930 ? 1990 mhz class ab with combined outputs, r04360, 0.508 mm thick ltn/PTMC210204MD e2 1805 ? 1880 mhz class ab with combined outputs, r04360, 0.508 mm thick ltn/PTMC210204MD e3 2110 ? 2200 mhz class ab with combined outputs, r04360, 0.508 mm thick find gerber files for these reference fixtures on the infineon web site at www.infineon.com/rfpower typical rf performance (data taken in production test fixture)
PTMC210204MD data sheet 4 of 10 rev. 03, 2016-06-14 5 15 25 35 45 55 -65 -55 -45 -35 -25 -15 25 30 35 40 45 efficiency(%) acp up & low (dbc) average output power (dbm) single-carrier wcdma drive-up v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, ? = 1990 mhz, 3gpp wcdma signal, 7.5 db par, 3.84 mhz bandwith efficiency acp low acp up c210204md-gr2c 0 5 10 15 20 25 30 10 15 20 25 30 35 40 1820 1870 1920 1970 2020 2070 2120 drain efficiency (%) gain (db) frequency (mhz) single-carrier wcdma broadband v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, p out = 34 dbm, 3gpp wcdma signal, 7.5 db par, 3.84 mhz bw gain efficiency c210204md-gr3 typical performance (cont.) 5 15 25 35 45 55 -65 -55 -45 -35 -25 -15 25 30 35 40 45 efficiency(%) acp up & low (dbc) average output power (dbm) single-carrier wcdma drive-up v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, ? = 1930 mhz, 3gpp wcdma signal, 7.5 db par, 3.84 mhz bandwidth efficiency acp up acp low c210204md-gr2a 5 15 25 35 45 55 -65 -55 -45 -35 -25 -15 25 30 35 40 45 efficiency(%) acp up & low (dbc) average output power (dbm) single-carrier wcdma drive-up v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, ? = 1960 mhz, 3gpp wcdma signal, 7.5 db par, 3.84 mhz bandwidth efficiency acp low acp up c210204md-gr2b
data sheet 5 of 10 rev. 03, 2016-06-14 PTMC210204MD -50 -40 -30 -20 -10 -55 -50 -45 -40 -35 1820 1870 1920 1970 2020 2070 2120 return loss (db) acp (dbc) frequency (mhz) single-carrier wcdma broadband v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, p out = 34 dbm, 3gpp wcdma signal, 7.5 db par acp up input return loss c210204md-gr4 0 15 30 45 60 0 10 20 30 40 25 30 35 40 45 efficiency (%) gain (db) output power (dbm) cw performance v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma gain efficiency c210204md-gr5 1930 mhz 1960 mhz 1990 mhz typical performance (cont.) -40 -30 -20 -10 20 25 30 35 1850 1900 1950 2000 2050 2100 input return loss (db) power gain (db) frequency (mhz) small signal cw v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma gain input return loss c210204md-gr7
PTMC210204MD data sheet 6 of 10 rev. 03, 2016-06-14 load pull cw signal: v dd1 = v dd2 = 28 v, i dq1 = 20 ma, i dq2 = 120 ma p 1db class ab max output power max pae freq [mhz] zs [ ] zl [ ] gain [db] p out [dbm] p out [w] pae [%] zl [ ] gain [db] p out [dbm] p out [w] pae [%] 1930 30.5 ? j12.8 15.40 ? j8.85 29.92 41.07 12.79 51.47 18.01 + j1.18 31.45 39.94 9.86 57.02 1960 30.5 ? j12.8 14.58 ? j7.65 29.97 41.09 12.85 52.17 17.16 + j0.14 31.26 40.16 10.38 57.35 1990 30.5 ? j12.8 15.26 ? j9.82 29.61 41.06 12.76 50.58 16.16 + j0.97 31.25 39.88 9.73 57.30 reference circuit, tuned for 1930 ?1990 mhz dut PTMC210204MD v1 test fixture part no. ltn/PTMC210204MD v1 pcb rogers 4350, 0.508 mm [.020"] thick, 2 oz. copper, r = 3.66 find gerber files for this reference fixture on the infineon web site at www.infineon.com/rfpower ref erence circuit assembly diagram (not to scale) PTMC210204MD_cd_02_4-29-2016 ro4350, .20 mil, 2 oz PTMC210204MD_02 r105 r109 c113 c114 c103 c104 r101 c102 r106 c111 r102 c112 r111 r110 c207 c206 u1 c109 c110 c106 c101 c105 r103 rf_out rf_in c205 c204 c208 r201 u2 c201 c203 c202 r104 r108 c108 c107 v g2b v g1b v d1b v d2b r107 v d1a v g2a v g1a v d2a
data sheet 7 of 10 rev. 03, 2016-06-14 PTMC210204MD component information component description manufacturer p/n input c101, c103, c105, c107, c111, c113, c203, c207 capacitor, 4.7 f murata electronics north america grm32er71h475ka88l c102, c104, c106, c108, c112, c114, c202, c206 capacitor, 10 f taiyo yuden umk325c7106mm-t c109, c110 capacitor, 0.8 pf atc atc800a0r8ct250t c201, c204, c205, c208 capacitor, 10 pf atc atc800a100jt250t r101, r103 resistor, 0.0 ohms panasonic electronic components erj-3gey0r00v r102, r201 resistor, 50 ohms anaren c8a50z4a r104, r105, r106, r107 resistor, 1k ohms panasonic electronic components erj-8geyj102v r108, r109, r110, r111 resistor, 4.3k ohms panasonic electronic components erj-8geyj432v u1, u2 hybrid coupler anaren x3c19p1-03s reference circuit (cont.) pinout diagram vd2/rfout b vd1 a vg2 a vg1 a rfin a n/c n/c n/c n/c rfin b vg1 b vg2 b vd1b vd2/rfout a 1 2 3 4 5 6 7 8 9 10 11 12 14 13 PTMC210204MD_pd_5-2-2016 source: plated copper heat slug on back- side of package vd2/rf out a vd2/rf out b rf in a rf in b
PTMC210204MD data sheet 8 of 10 rev. 03, 2016-06-14 4x 1.02 9.02 0.52 x 45 2x 5.30 7.65 2.35 3.83 2x 2.02 2x 0.35 1.50 2x 3.25 11x 1.00 13.06 4.00 2.62 0.10 max. 1.27 1.86 z y 12x 0.35 1 14.94 0.15 4 x 7 2 x 10 19.44 1 pg-hb1dso-14l_01_11-06-2015 z (5:1) r 0.20 1.00 1.02 0 .25 0.25 5 3 stand off 0...0.1 0 min. package outline specifications package pg-hb1dso-14-1 (formed leads) diagram notes-unless otherwise speci? ed: 1. mold/dam bar/metal protusions of 0.30 mm max per side not included. 2. metal protrusions are connected to source and shall not ecxceed 0.10 mm max. 3. fillets and radii: all radii are 0.3 mm max. 4. interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6. all tolerances 0.1 mm. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron [10 microinch] max.
data sheet 9 of 10 rev. 03, 2016-06-14 PTMC210204MD find the latest and most complete information about products and packaging at the infineon internet page http://www.infineon.com/rfpower 2 2 3.00 0.05 2x 0.50 6.91 3.45 16.26 18.44 package outline specifications (cont.) package pg-hb1dso-14-1 (formed leads, bottom side) diagram notes-unless otherwise speci? ed: 1. mold/dam bar/metal protusions of 0.30 mm max per side not included. 2. metal protrusions are connected to source and shall not ecxceed 0.10 mm max. 3. fillets and radii: all radii are 0.3 mm max. 4. interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6. all tolerances 0.1 mm. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron [10 microinch] max.
|
